0
There no items in your cart.
Checkout
MJTRENDS
Forum
newbie

Reupholstering amotorcycle seat

Posted by guest on: Feb 11th 2005 6:28:34 pm

I have an ostrich vinyl I want to reupholster a motorcycle seat with. I tried unsuccessfully, once. The front portion is complex, with concave and convex surfaces, curves and planes. The rear section is relatively simple with a...

guest, February 11th 2005 6:52:40 pm

The crease about 1/3 across is where I thought about possibly sewing another piece at 90 degrees to the other to...

View Entire Thread
1
newbie

Vinyl Wrinkles

Posted by guest on: Jan 8th 2005 2:50:06 pm

I have vinyl that has already been printed on, but has wrinkles and creases. I am having a lot of trouble getting out the wrinkles and creases. I don't want to damage the print or colors. I have tried heating the vinyl in...

guest, March 14th 2005 10:01:34 am

Dear Friend, Vinyl (PVC) fabric, sometimes being laminated with a variety of different backings, as per...

guest, January 11th 2005 4:41:30 pm

I have tried to use a steam treatment on pvc fabric with limited success. It depends on how "deep" a wrinkle you...

View Entire Thread
3
newbie

Razer Cut Fasion PVC

Posted by guest on: Jan 5th 2005 12:57:01 am

I wonder if some one can answer a question.I whant to razer cut a Pvc skirt on the sides. Does PVC not rip? I also saw a site that had some directions but I did not save it If some one could help that would be great thanks

guest, March 14th 2005 10:07:49 am

Hi, That would be much easier to cut pvc fabric with a hand held driven slitter. You should be careful, while...

guest, February 21st 2005 1:47:10 pm

Just ripping the PVC will result in a ragged and warped edge with the plastic stretched beyond its point of...

View Entire Thread
3
newbie

Reinforcing a PVC seam

Posted by guest on: Jan 3rd 2005 8:33:02 pm

Anyone, do you know what kind of glue or tape or other method that would be suitable to reinforce or stabilize the rear seam on a pair of PVC pants? This is 4 way stretch PVC (without fabric bonded). At first wear, the PVC...

guest, September 23rd 2007 6:07:07 pm

.3mm and .4mm are well suited for dresses. If you want more stretch go with .3mm, if you want more durability,...

guest, August 6th 2007 2:58:04 pm

What about for dresses?

View Entire Thread
3
newbie

gluing pvc fabric

Posted by guest on: Dec 20th 2004 3:49:05 pm

I'm trying to get an airtight seam with vinyl fabric. Does anyone out there have any suggestions on how to do this? Perhaps the use of an adhesive of some kind to bind the fabric together instead of sewing it? Thanks Mason

guest, June 15th 2005 8:53:04 pm

Hi, can you tell exactly what is the brand/name of that kit? Thank you

guest, January 11th 2005 4:39:22 pm

I have used the automotive kits found in stores like Wal-Mart to glue vinyl and plastics. I think it is...

View Entire Thread
4
Prev616263646566Next