There no items in your cart.

Cut out tanktop pieces and trim from pattern

Place the pattern over your latex sheeting and use a rotary cutter and cutting mat to cut it out.

Glue front neck trim

When finished glueing, cut the trim so that it ends 1/4 inch past the shoulder seam.

Glue front shoulder strap to rear shoulder strap

Also glue the 1/4 front neck trim that went past the end of the front shoulder to the rear of the tanktop.

Mark rear neck trim

Place rear neck trim where it will be glued. Mark the location of the shoulder seams on the trim and then cut the trim at those marks.

Glue rear neck trim

Align the trim with the shoulder seam (it will go on top of 1/4 of the front neck trim)

Glue front arm trim

Glue arm trim to front of tanktop. Ensure that the trim extends 1/4 inch past the end of the shirt at both ends of the trim

Glue rear arm trim

Start at shoulder seam and line it up with the shoulder seam. Trim will lie on top of 1/4 inch of the front trim. Work your way down to the armpit. At the armpit, ensure that the rear trim ends 1/4 inch short of the end of the tanktop

Glue the sides

Glue the front on top of the rear of the tanktop at the side seam. Line up the seam so that the front trim and rear trim butt against each other perfectly

Trim the armpit

If there is any excess trim or rough area at the armpit, trim it to be perfectly smooth

Trim hemline

If the hemline doesn't match up prefectly at the side seams, trim it to ensure a straight hem

Allow adhesive to cure

Give your seams 24 hours to cure. YEAH - enjoy your new mens latex tank top!

Do you have an article, tip, or trick that you would like to share? Send us an email at: sales@mjtrends.com so that we can include it in future articles.